室內污染監測用微量氣體采樣器S-21 產品型號:S-21 原產地:日本 室內污染測定用 微量氣體測定儀 可以用來測定室內微量的甲醛濃度。 目前的甲醛的濃度...AIR SAMPLER S-21 測定范圍 0.01~1.2ppm 試料采取量 2L、3L、9L 測定時間 10分、30分 吸引流量 200ml/min
更新時間:2024-12-19
在線留言室內污染監測用微量氣體采樣器S-21
目前的甲醛的濃度測定方法一般是采用吸光光度法或是HPLC法。但這需要昂貴的儀器、相應的知識和熟練的操作。而簡易測定法卻無法測定室內微量的甲醛含量。新開發的檢知管,已經能夠測定0.01~1.2ppm的濃度范圍,*WHO提出的室內環境推薦值0.1mg/m3(0.08ppm30min平均)。
Model Number | Air sampler S-21 |
Sampling pump | diaphram |
Maximum suction pressure | more than 400hPa (At full load) |
Flow rate settings range | 50 - 500mL/min |
Flow Meter Accuracy | ±5% of full scale |
Repeatability of Flow Meter | ±1% of indicated value |
Timer function | 1min?99hrs.59min. with Digital setting (addition display) *It is set to stop after 30 minutes with the shipment settings display; subtraction display |
Operating temperature range | orange to red-purple |
Power source | 0 - 40℃ |
Dimensions | 125(W) x 146(H) x 220(D)mm |
Weight | 2.5kg |
Option | Position pole to keep measuring height, Tip cutter : B191 and Thermometer |
室內空氣質量監測用有毒氣體快速檢測管 Detector tubes for Air samplers
Application | Gas to be measured | Tube No. | (*) | Measuring range |
Indoor air pollutants | Formaldehyde | 710 Formaldehyde | 20 | 0.01-0.48ppm |
Formaldehyde | 710A Formaldehyde | 20 | 0.05-2.0ppm | |
Formaldehyde | 713 Formaldehyde | 20 | 0.01-0.50ppm | |
Toluene | 721 Toluene | 10 | 0.05-1.0ppm | |
Xylene | 721 Toluene (+) | 10 | 0.1-1.4ppm | |
Ethyl benzene | 721 Toluene (+) | 10 | 0.05-1.0ppm | |
p-Dichlorobenzene | 730 p-Dichlorobenzene | 10 | 0.01-0.40ppm | |
Nitrogen dioxide | 740 Nitrogen dioxide | 10 | 0.01-0.20ppm | |
Trichloroethylene | 750 Trichloroethylene | 10 | 30-920µg/m3 | |
Tetrachloroethylene | 760 Tetrachloroethylene | 10 | 30-920µg/m3 | |
For museums | Ammonia | 900NHH Ammonia | 10 | 10-80µg/m3 |
For clean room monitoring | Ammonia | 901NHL Ammonia | 10 | 1-12µg/m3 |
(*) shows a number of measurements per box
■ 甲醛檢知管 710
使用采取器 AIR SAMPLER S-21
測定范圍 0.01~1.2ppm
試料采取量 2L、3L、9L
測定時間 10分、30分
吸引流量 200ml/min、300ml/min
吸引壓力 150hPa以上
顏色的變化 黃色→桃色
使用溫度范圍 10~35℃
使用濕度范圍 15~95%RH
Currently, measurements for concentration of formaldehyde is done most commonly by absorptiometric method or HPLC (high performance liquid chromatography) method.
However, these methods require expensive devices, knowledge and experience.
Furthermore, in detector tube method which is effective as a simple measurement, up to this date it had been impossible to detect and measure the trace amount of formaldehyde at the indoor pollution level.
With Air sampler S-21, this newly developed detector tube is capable of measuring within the range of 0.01 - 1.2ppm. And it covers the indoor environment suggested value by WHO, which is 0.1mg/m3 (0.08ppm 30min average).
目前,甲醛濃度的測量,是zui常用的工作方法或absorptiometric高效液相色譜(高效液相色譜)方法。
但是,這些方法需要昂貴的設備,知識和經驗。
此外,檢測管法是一種簡單有效的測量,到這一天,未能探測和跟蹤測量的室內甲醛污染程度的數額。
與空氣采樣器的S - 21,這個新開發的探測器能夠管內的范圍0.01 - 1.2ppm測量。它涵蓋了室內環境建議值由世衛組織,這是0.1mg/m3(0.08ppm 30分鐘平均)。